White Primed & Oak Stair Cladding

Stair cladding consists of different materials you use to cover your staircase. Cladding covers the existing stairs with wooden floor planks and can be made from different materials.

To work out what size your stair cladding needs to be, you need to first measure the size of your steps. To do this, measure from the face of the riser to the outer point of the bullnose. Using this measurement, you can then cut the packing strips down to the right size before gluing and screwing them to the existing risers.

Here is a brief outline of how to install your stair cladding:

1. Start at the top of the staircase and work your way down.
2. Cut two risers to size and apply some adhesive.
3. Attach them firmly to the packing strips.
4. To complete your first stair, apply some adhesive to the existing tread, then press the new one firmly in place.
5. Ensure that the lip and recess fit together snugly.

Cladding for stairs is not necessarily slippery but be careful not to apply any polishes to the stairs as this can make them slippery. It’s also best to avoid running up and down the stairs in your socks.

It’s best not to fasten your treads or risers with just nails or staples. Adhesive is much more important than the fasteners and there will be times when fastening may be limited.

The lumberjack tends to be the best adhesive for oak stair cladding because it is flexible and does not cause any warping or shrinkage. It is also very easy to use and sets very quickly for a fast and efficient installation.

To protect and maintain the appearance of oak stair cladding, you can use either a wood varnish, oil or wax.